Відео

An Albino Gorilla🤣🤣🤣🤣

Can you post a link to all the items you bought?

I really appreciate tutorials like this. I have two nit-picks to suggest. For those who have never done faucet changing before, please remind them to turn the water off below the sink before beginning. Secondly, I highly suggest pulling the lever to stop the sink up before beginning any sink project. Any tiny screw or tid-bit will certainly find its way to the drain if given half a chance when dropped!

That grey plastic right before catridge is not moving at all what do do?

Excellent tutorial!

Now I know I'll just pay the leaking water than spend hundreds of dollars on a plumber or a dozens of hours of my time

thanks sir.

Thank you for breaking this all down step by step. I was given a broken Kitchen Aid. The speed control bar was bent from dropping the machine. It wouldn’t stay in the off position and had to be held by tape. I wasn’t sure if replacing the bar would fix the issue. Only $10 to see if it would fix it was worth the time. I didn’t remove the head from the stand or the wires and it still worked. I even did it by myself and even though I could see how these steps would be helpful I couldn’t get the wires off and I didn’t want to damage them. The machine works perfectly! No more tape.

A professional yapper. No one cares about moen warranty, and I mean no one. Get to the point today Junior. Yap yap yap.

What a legend. Thanks for your help

Thank you for no nonsense chatter and getting right to the point!

Great video better than Moen's

what is the wrench called? i am looking for it on amazon. I have a drip and need to fix it.

The best vacuum- i have mine since 2010.

This was very helpful I lost power with my 2016 Lexus RX 350 look at this video and fix my problem for free I wonder what it would have cost me if I would have went to the dealer like I was thinking to do prior to watching this video❤ Thank you so much!

Where to buy the same Roman Tub Fixture.

To turn hot water on, I have to turn it counter clockwise. To reach the cartridge do I need to move the handle clock wise

Good job. Good Detail. Two suggestions. Make sure to suggest they turn off the water supply valves first. Also, a good idea to close the popup drain so you can't loose the screw or washer down the drain, into the trap below. Thanks.

"this part" "not sure what this is called" "on this" "this" You're unsure of what any part is called and making an instructional video after rambling on and on.

Thanks for the video. It convinced me to not deal with it and to call a trained professional. 😀

Do you mind if I ask the average labor charge for the switch and/or worm gear replacement? They are the two most common repairs for these machines.

Great video, very well done. Only snag, I installed the cart the direction you did, and my hot and cold are reversed. I don't have time to go back into it, so, II will deal with it until I have time for a do-0ver.

If I don't put the spout on will a siphon hose fit into the can or is it screened off to prevent that?

What model faucet is that?

yikes, thxs for sharing...

Thanks for the information! Got Cartridges Free! Didn’t know that! Again thank you 🙏!

Is MAP gas better than propane? Having trouble getting the solder to melt.

You want dials and knobs, no digital crap.

No agitator means smelly clothes

1990 Whirlpool direct drive washing machine best one ever made. It still works after replacing original motor, transmission, timer, and clutch this year. Water mixing valve replaced 5 years ago. Whirlpool tech told me to keep fixing it and he said my wash basin is better than today's crap.

This model Delta is around the 25-25 year old age. Good running little machines and believe was made in Pennsylvania. Better than the junk that's in today's market. I just aquired one for free also. Motor runs good but also needs a good clean up. Your video will definitely help out my working on this since there are a lot of small parts. Thanks for taking the time to make this.

Thank you. I was able to replace the cartridge in my bathroom sink.

Thanks a lot man. It's works for me. Was very helpful video. I really do appreciate it.

I'm trying to take the Phillips screw out, but it's just spinning. Any ideas?

I came here for a pad and rotor install and saw you put on a rotor and bleed a brake line lol

I was wondering, and not sure if you covered this minor item. I’m curious how long is a regular cycle? 😃

We've had a similar LG washer from around 2018 or so. I personally hate it. It doesn't wash as well as the LG front load washer it replaced, lint is a major issue as well. I would NEVER buy another. I have never experienced dry sections of clothes as you have.

Watches video to learn how to open the main part. Him: "I've already cracked this open..." The whole reason I was watching the video 😒😒

Thank you! With our Samsung, twice within 4 years have replaced the 4 corner springs that keep the drum balanced. Sick of these techno-cheap machines. Gonna go back to old school.

My plastic gray thing just keep spinning (after a lot of effort and CLR) but it is not lifting out. Any tips?

How do you keep the lid open as it fills with water?

This is, BY FAR the best machine in the entire world.❤

TNX NIGGGGA THATS HELP ❌❌❌🚀😍😍😍🚙🚀🔥🔥

Wow this helped very well thankyou

Impellor cleaning is not as good as anagitatr

You are the best thank you👍

Great video. Explained everything and was easy to follow.

great job, explained clearly, thank you!!!

Just tried it and it worked. I had my battery replaced at the dealership and the window wasn't working when I got home until I tried this 😊

Very helpful. Thank you!!